| How to deal with the problem of heat in the work of the mill? |
|
| 2024-3-28 publish |
How to deal with the problem of heat in the work of the mill?
Mill in the working process may appear heat problems, many users worry that continued use will cause damage to the equipment, then shut down the equipment, this is actually a correct way to deal with, because the mill heat is mainly caused by a long time, high intensity work, which uses air-cooled or water-cooled cooling system to reduce the machine temperature can be, However, there are other factors that cause the crusher to heat, and the treatment also needs to be appropriate.
1, excessive impurities. Due to the lack of cleaning inside the equipment, a large amount of dust and impurities may accumulate after a long time of use, and the air is not circulated, resulting in the heating problem of the equipment. Therefore, in order to avoid the occurrence of similar situations, it is necessary to clean the key parts of the equipment regularly to speed up the air circulation to reduce the temperature of the machine.
2. The load is high. If the equipment is overloaded for a long time and with high intensity, the load of the equipment is too high, and the loss of some parts is also caused, thus affecting the operation of the heat dissipation system. Therefore, the work intensity should be reduced, such as appropriately reducing the amount of material input or waiting for the machine to resume natural cooling before starting.
3. Improper environment. The operating environment of the device is also an important factor affecting the operating temperature of the device. For example, in a high temperature and humidity environment, the operating temperature of the device will rise. If the temperature rises too fast, some faults may occur. Therefore, the environment of high temperature and humidity should be minimized, and the use of the crusher should be avoided in the case of direct exposure.
The heat in the working process of the mill is a common phenomenon, and sometimes it is inevitable that this situation will occur, what we can do is to reduce the occurrence of this situation, if it occurs, then take appropriate measures to solve the heat of the mill, so as to protect the equipment as much as possible and improve production efficiency.
|
|
|
0938-2721678 
